Airport Barricade Hazard Light

Leveraging Surface-Mount Technology (SMT) to manufacture the electrical components, OTW’s innovative barricade light triples the number of LEDs, eliminating point brightness and providing a more uniform visual light profile. Extremely adaptable, our Airport Hazard Light can easily switch between steady-burn and flashing states. This hazard light also retains our signature convenient threaded base to effortlessly install into OTW airport barricades, without the need for extra hardware. Finally, the Airport Hazard Light will arrive with a preinstalled rechargeable battery, slashing the number of personnel needed to quickly deploy the required safety boundaries on your job sites. Version 1 ARL-DM Legacy Light available upon request.

FEATURES & BENEFITS

• Manual switch to change states: Flashing, Steady-burn, and Off
• High-efficiency solar panel
• Automatic activation when ambient light falls below 60 lux
• Preinstalled 1.2v SC3300 NiMH Battery
• Operating Temperature Range: -4°F to +131°F / -20°C to +55°C
• Water and dust resistant to IP65 standard
• Advanced light diffusion technology

HAZARD LIGHT OUTPUT

• Red LED effective intensity of 9.6 candela
• 60 Flashes/Min
• Nominal Night Range: 2 miles / 3.2 km
• Vertical Divergence: +/- 5°
• Horizontal Output: 360°

MOVEMENT AREAS: FAA AC 150/5370 – 2G

This FAA advisory circular also calls for “Omni-directional red lights either flashing or steady-burning, collapsible barricades, and/or signs to separate all construction/maintenance areas from the movement areas.

REDUCED VISIBILITY: FAA AC 150/5370 – 2G

During reduced visibility or night hours, supplement the barricades with red lights, either flashing or steady-burning.