Airport Barricades
The Original Low-Profile Airport Barricades
In stock & ready to ship | Made in the USA | 100% Recyclable
Our OG barricade, the AR10x96 Low-Profile Airport Barricade, was our entry into the safety industry. Over twenty years later, we still stand by it as one of the best airport barricades on the market.
The 24” Mid-Profile Airport Barricade boasts 100% recyclability and a 100% FOD-free patented hazard flag connection system, just like the Low-Profile Barricade. Both are frangible, wing-tip clearance compliant, and require no additional hardware to connect our barricade flags or hazard lights.
✓ Exceeds FAA and MIL-STD requirements
✓ Reflective sheeting
✓ Engineered UV protection
✓ Meets FAA AC150/5370-2G “Operational Safety on Airports During Construction”
✓ Meets DoD Unified Facilities Criteria (UFC) 3-260-01 “Airfield and Heliport Planning and Design”
✓ “Buy America Act” Compliant
Best Selling Airport Barricades
10″ Low-Profile Airport Barricade
24" Mid-Profile Airport Barricade
The AR24x96 Low-Profile Barricade, taller and heavier than the 10-inch model, is often used to mark large construction zones near active aircraft. Its visibility from long distances makes it ideal for warning pilots of larger aircraft about hazards. It also works well in low-speed construction zones, parking lots, and other areas where federal highway standards don’t apply.
Low-Profile Delineator
The AR3 Low-Profile Delineator (LPD), an alternative to safety cones, was developed to offer airports and heliports a more substantial marking option compared to lightweight markers like cones or delineator posts. With its bright orange color and high-intensity orange and white reflective sheeting, the AR3 serves as a highly visible hazard indicator for both pilots and ground workers.
10″ AND 24" LOW-PROFILE AIRPORT BARRICADES
FEATURES & BENEFITS
- Integrated connection design and large internal capacity eliminate the need for external weights, such as sandbags
- Does not violate wingtip clearance safety standards
- Includes factory-installed high-intensity orange and white reflective sheeting at no additional cost
- One-year manufacturing defect warranty
FEDERAL CERTIFICATIONS
- Meets FAA AC150/5370-2G “Operational Safety on Airports During Construction”
- DoD Unified Facilities Criteria (UFC) 3-260-01 “Airfield and Heliport Planning and Design”
- “Buy America Act” Compliant
COMPOSITION
- Blow-molded UV-resistant High-Density Polyethylene (HDPE)
- Reflective sheeting
SIZE: 10″ AIRPORT BARRICADE
- Height: 10 in / 25.4 cm
- Length: 96 in / 2.44 m
- Width: 10 in / 25.4 cm
- Empty: 19 lb / 12.7 kg
- Full: Apprx 270 lb / 122.5 kg*
SIZE: 24″ AIRPORT BARRICADE
- Height: 24 in / 60.9 cm
- Length: 96 in / 2.44 m
- Width: 14 in / 35.5 cm
- Empty: 35 lb / 12.7 kg
- Full: Apprx 375 lb / 122.5 kg*
*Weight calculation based on 30 standard US gallons of water
OPTIONAL ACCESSORIES
- Two solar hazard lights
- Two hazard flags
NSN Reference & Corresponding OTW Part Numbers
NSN 5660-01-464-7545
OTW AR-10×96 – Orange/White
Request a Quote for Airport Barricades
We will get back to you with direct pricing within 48 hours of submitting your quote request.